Publication 1756-UM514B-EN-P - February 2003
Using RSLogix 5000 in Remote I/O and Block Transfer Applications 9-17
Configuring the Remote I/O Modules
Configure the newly added remote I/O modules in the wizard screen
that appears.
Table 9.5 describes the configurable parameters that appear on the
wizard screens.
Table 9.5
1756-DHRIO Module Configurable Parameters
Naming Screen
(first screen):
Parameter: Definition:
Name Module name. This field is required.
Description Optional description of the module.
Group Determines what group on the module provides the first
word of I/O data. This selection is affected by the parent
module’s configuration. For example, if the parent
module’s size = 1/2 rack (4 I/O groups), this module’s
configuration offers the option of starting with group 0, 1,
2 or 3.
Slot Location of the remote I/O module.
To Next Page
Loading...
