Publication 1756-UM514B-EN-P - February 2003
Connecting a ControlLogix Controller to Remote I/O 10-5
Set the Module Switches
In this application, channel B on the 1756-DHRIO module must be set
for RIO. Channel A can be used for remote I/O or DH+, regardless of
the usage assigned to channel B.
For more information on setting switches on the 1756-DHRIO module,
see
page 1-5.
Configure First 1756-DHRIO Module
Use RSLogix 5000 to configure the 1756-DHRIO module. Figure 10.5
shows some sample configuration screens for the first 1756-DHRIO
module in this example.
Figure 10.5
For more information on configuring a 1756-DHRIO module in a
remote I/O application, see
Chapter 9, or the RSLogix 5000 online
help.
1
2
To Next Page
Loading...
