Publication 1756-UM514B-EN-P - February 2003
6-6 Messaging Between ControlLogix Controllers and PLC-5s or SLC-5/04s
Configure Message Instructions
Use RSLogix 5000 to configure the ControlLogix controller message
instructions.
Figure 6.5 shows the message instruction tabs necessary
for this example.
Figure 6.5
For more information on how to configure message instructions using
RSLogix 5000, see
page 3-15 or the RSLogix 5000 online help.
Chapter Summary and
What’s Next
In this chapter, you learned about messaging between ControlLogix
controllers and PLCs or SLCs.
Chapter 7 describes Messaging Between
ControlLogix Controllers.
3
See Logix5000 Controllers
General Instructions Reference
Manual, publication 1756-RM003
Configuration tab Communication tab
To Next Page
Loading...
