Publication 1756-UM514B-EN-P - February 2003
Block Transfers with the 1756-DHRIO Module 11-5
Configure FLEX Adapter
Use RSLogix 5000 to configure the FLEX adapter. Figure 11.3 shows
some sample configuration screens for the FLEX adapter in this
example.
Figure 11.3
For more information on configuring a FLEX adapter in a remote I/O
application, see
Chapter 9, or the RSLogix 5000 online help.
Configure Block Transfer Module
Use RSLogix 5000 to configure the Block Transfer module. Figure 11.4
shows some sample configuration screens for the Block Transfer
module in this example.
Figure 11.4
For more information, see page 9-17 or the RSLogix 5000 online help.
3
4
To Next Page
Loading...
