Publication 1756-UM514B-EN-P - February 2003
Messaging Between ControlLogix Controllers and PLC-5s or SLC-5/04s 6-3
Set the Module Switches
In this application, channel A on the 1756-DHRIO module must be set
for DH+. For more information on setting switches on the
1756-DHRIO module, see
page 1-5.
Configure Message Instructions
Use RSLogix 5000 to configure the ControlLogix controller message
instructions.
Figure 6.2 shows the message instruction tabs necessary
for this example.
Figure 6.2
For more information on how to configure message instructions using
RSLogix 5000, see
page 3-15 or the RSLogix 5000 online help.
1
2
See Logix5000 Controllers
General Instructions Reference
Manual, publication 1756-RM003
Configuration tab Communication tab
To Next Page
Loading...
