Publication 1756-UM514B-EN-P - February 2003
Connecting a ControlLogix Controller to Remote I/O 10-11
Configure 1771-ASB Adapter
Use RSLogix 5000 to configure the 1771-ASB adapter. Figure 10.13
shows some sample configuration screens for the 1771-ASB adapter in
this example.
Figure 10.13
For more information on configuring a 1771-ASB adapter in a remote
I/O application, see
Chapter 9, or the RSLogix 5000 online help.
Run RSNetworx
You must run RSNetworx for this application to begin operation. For
more information on how to run RSNetworx software, see the online
help for that software.
5
6
To Next Page
Loading...
