Publication 1756-UM514B-EN-P - February 2003
4-14 Messaging Between PLC-5s and SLC-5/04s
Configure Message Instructions
Use RSLogix 5 to configure the remote PLC-5 message instructions
being sent to ControlLogix controller B.
Figure 4.14 shows a message
instruction for this example.
Figure 4.14
For more information on how to configure message instructions using
RSLogix 5, see
page 3-9 or the RSLogix 5 online help.
Chapter Summary and
What’s Next
In this chapter, you read about using messaging between PLCs and
SLCs.
Chapter 5 describes Messaging Between PLC-5s or SLC5/04s and
ControlLogix Controllers.
3
See SLC-500 Instruction Set
Reference, publication 1747-6.15
To Next Page
Loading...
