Publication 1756-UM514B-EN-P - February 2003
11-4 Block Transfers with the 1756-DHRIO Module
Set the Module Switches
Channel B on the 1756-DHRIO module must be set for RIO. Channel
A can be used for remote I/O or DH+, regardless of the usage
assigned to channel B.
For more information on setting switches on the 1756-DHRIO module,
see
page 1-5.
Configure the 1756-DHRIO Module
Use RSLogix 5000 to configure the 1756-DHRIO module. Figure 11.2
shows some sample configuration screens for the 1756-DHRIO
module in this example.
Figure 11.2
For more information on configuring a 1756-DHRIO module in a
block transfer application, see
Chapter 9, or the RSLogix 5000 online
help.
1
2
To Next Page
Loading...
