Allen-Bradley 1756-DHRIO - Connection Path Examples

Publication 1756-UM514B-EN-P - February 2003
Using Programming Software in DH+ Applications 3-21
Connection path examples
The following examples are based on this system:
programming
terminal
serial DH+ Ethernet ControlNet
ControlNet = port 2
serial
ControlNet
Ethernet
DH+
ControlNet module Ethernet module DH+ module controller module ControlNet module Ethernet module DH+ module
ControlNet = node 49
ControlNet module Ethernet module DH+ module controller module
ControlNet = node 42
port 1 = backplane
port 2 = ControlNet
local chassis
remote chassis
41027
Ethernet IP address = 21.21.21.21
DH+ = port 0
Ethernet IP address = 34.34.34.34
DH+ = node 037
DH+ = node 24
port 1 = backplane
port 2 = channel A = node 025
port 3 = channel B = node 026
Ethernet IP address = 127.127.127.12
port 1 = backplane
port 2 = Ethernet