Publication 1756-UM514B-EN-P - February 2003
Block Transfers with the 1756-DHRIO Module 11-11
Configure Message Instruction
Use RSLogix 5000 to configure the block transfer message instructions.
Figure 11.12 shows the message instruction tabs necessary for this
example.
Figure 11.12
For more information on how to configure message instructions using
RSLogix 5000, see
page 9-18 or the RSLogix 5000 online help.
Chapter Summary and
What’s Next
In this chapter, you learned about block transfer applications. Chapter
12 describes Troubleshooting the 1756-DHRIO Module.
7
Configuration tab Communication tab
To Next Page
Loading...
