Allen-Bradley 1756-DHRIO - Chapter 4; Set the Module Switches; Set-Up a Routing Table for the 1756-DHRIO Module

Publication 1756-UM514B-EN-P - February 2003
Messaging Between PLC-5s and SLC-5/04s 4-3
Set the Module Switches
In this example, both Channel A and Channel B on the 1756-DHRIO
module must be set for DH+. For more information on setting
switches, see
page 1-5.
Set-Up a Routing Table for the 1756-DHRIO Module
Use RSLinx to set-up a routing table for the 1756-DHRIO module.
Figure 4.2 shows the routing table for this example.
Figure 4.2
For more information on how to set-up a routing table, see page 3-5
or the RSLinx online help.
1
2