Allen-Bradley 1756-DHRIO - Set the Module Switches; Set-Up a Controller Slot for the 1756-DHRIO Module

Publication 1756-UM514B-EN-P - February 2003
5-6 Messaging Between PLC-5s or SLC5/04s and ControlLogix Controllers
Set the Module Switches
In this example, Channel A on the 1756-DHRIO module must be set
for DH+. For more information on setting switches on the
1756-DHRIO module, see
page 1-5.
Set-Up a Controller Slot for the 1756-DHRIO Module
In this example, the controller is not located in the default slot (slot 0)
of the ControlLogix chassis. You must use RSLinx to set-up a controller
slot for the 1756-DHRIO module.
Figure 5.5 shows the controller slot
necessary for this example.
Figure 5.5
For more information on how to set-up a controller slot, see page 3-7
or the RSLinx online help.
1
2