Publication 2707-UM005B-EN-P
4-4 Transferring Applications
9. Highlight “Download File to MicroView” and press [Return].
The Communication Port Selection screen appears. You will not
see this screen if a communication port was specified during
DPS installation.
10. Highlight the serial port on your computer that is connected to
the MicroView (COMM1 or COMM2) and press [Return].
11. When communication is established, the following screen
appears:
12. Enter or select the file name that you want to download.
TIP
If communication link does not occur in 60
seconds, you get an error message. Check cable
connections and verify that the MicroView is in
the Program Mode.
To Next Page
Loading...
