Publication 2707-UM005B-EN-P
Troubleshooting and Maintenance 8-5
To access the test functions:
1. Access the test functions from the Mode Menu.
2. From the Mode Menu, select item 4 to display the Other Menu:
3. From the Other Menu, select item 4 to display the test selection
screen:
4. Use the [NEXT] and [PREV] keys to scroll through the test
options. Display the test you want to perform.
5. Press [] to initiate the test.
6. To terminate the test, press the [NEXT] and [PREV] keys to
display Reset in the test selection area. Press [ ] to reset the
terminal.
1 Reset
2 Comm
3 Spec
4 Other
1 Code
2 Scale
3 Sim
4 Test
5 Ex
Current Test Selection
Diagnostic Test
<Test Selection>
To Next Page
Loading...
Need help?
General
