Allen-Bradley PLC-5 User Manual

Publication 1785-UM012D-EN-P - July 2005
Instruction Set Quick Reference D-11
Negate
NEG
Sine
SIN
Square Root
SQR
Instruction Description
NEG
NEGATE
Source N7:3
3
Dest N7:12
-3
sets if the operation generates a carry;
sets if overflow is generated;
sets if the result is zero;
When the input conditions are true, take the opposite sign of
the Source (N7:3) and store the result in the Destination
(N7:12). This instruction turns positive values into negative
values and negative values into positive values.
Status
C
V
Z
S
Description
Bit
sets if the result is negative;
otherwise resets
otherwise resets
otherwise resets
otherwise resets
SIN
SINE
Source F8:11
0.7853982
Dest F8:12
0.7071068
When input conditions go true, take the sine of the value in
F8:11 and store the result in F8:12.
always resets
sets if overflow is generated;
sets if the result is zero;
Status
C
V
Z
S
Description
Bit
otherwise resets
otherwise resets
sets if the result is negative;
otherwise resets
SQR
SQUARE ROOT
Source
25
Dest N7:12
5
N7:3
When the input conditions are true, take the square root of th
e
Source (N7:3) and store the result in the Destination (N7:12).
Status
C
V
Z
S
Description
always resets
Bit
sets if overflow occurs during floating point
sets if the result is zero; otherwise resets
always reset
to integer conversion; otherwise resets

Allen-Bradley PLC-5 Specifications

General

Programming Software	RSLogix 5
Programming Languages	Ladder Logic
Power Supply	120/240V AC or 24V DC
Communication Ports	DH+, Remote I/O, Ethernet/IP, ControlNet
Operating Temperature	0 to 60°C (32 to 140°F)
Relative Humidity	5 to 95% non-condensing
Memory	Up to 64K words (user program and data)