Rockwell Automation Publication 6000-UM002E-EN-P - April 2018 121
Preventative Maintenance and Component Replacement Chapter 5
Figure 51 - Loosen screws on the LV Control Relay
3. Release the spring-loaded latches at the bottom of the control relay and lift
the control relay off the DIN rail.
Figure 52 - Release the spring-loaded latch on the LV Control Relay
4. Install the new control relay in reverse order of removal.
Loosen screws and
remove wires
Loosen screws and
remove wires
To Next Page
Loading...
