Rockwell Automation Publication 6000-UM002E-EN-P - April 2018 129
Preventative Maintenance and Component Replacement Chapter 5
Final Report
A complete, detailed report on all steps in the Preventive Maintenance
procedures should be recorded to identify changes.
A detailed description of all adjustments and measurements that were taken
during the process must be recorded (interlock adjustments, loose connections,
voltage readings, insulation resistance (IR) test results, parameters, etc.).
Prepare Final Report
The Rockwell Automation Service Engineer will provide a maintenance report to
the customer based on the outcome of the maintenance work. All steps in the
preventive maintenance process will be recorded in detail in the report and will
identify changes made.
The final report includes:
• A complete copy of the Preventive Maintenance Checklist.
• Problems found during the investigation process and rectification
recommendations.
• Adjustments and measurements during maintenance (including
mechanical adjustment, connection status, voltage reading, vibration test
results, parameters, and so on).
This information will be sent to the PowerFlex 6000 Technical Support and
Product Support for the latest on-site information for future maintenance and
technical support.
To Next Page
Loading...
