Allen-Bradley Rockwell Automation 1734-4IOL User Manual

26 Rockwell Automation Publication 1734-UM020B-EN-E - August 2019
Chapter 3 Add the POINT I/O 4 Channel IO-Link Master Module on an EtherNet/IP Network
On the Fault/Program tab, you can configure the state of the outputs
during Program and Fault modes for channels that are configured as
standard digital output or IO-Link.
On the Configuration tab, you can change the Input Filter Time for each
channel configured as standard digital input.

Allen-Bradley Rockwell Automation 1734-4IOL Specifications

General

Brand	Allen-Bradley
Model	Rockwell Automation 1734-4IOL
Category	Control Unit
Language	English