50 Rockwell Automation Publication 1734-UM020B-EN-E - August 2019
Chapter 4 Configure the POINT I/O 4 Channel IO-Link Master as IO-Link Master Using the Studio 5000 Add-on Profile
Locate the Parameter Index or Subindex Value in the IODD File
The details of each index and subindex depend entirely on the IO-Link device
and are described in the IO-Link Data Description (IODD) XML file for that
device or data sheet provided by the device vendor.
Using the Distance Normalization parameter for an Allen-Bradley® sensor (model
45LMS-U8LGC3) as an example, refer to the following diagram to see where a
specific parameter can be found on the device’s IODD file.
Chapter summary and
What’s Next
In this chapter, you learned how to configure the module as an IO-Link Master
module using the Studio 5000 Add-on Profile software. The next chapter
describes how to configure the module to function as a standard digital input or
output module.
To Next Page
Loading...
