Name: Allen-Bradley Rockwell Automation 1734-AENT
Brand: Allen-Bradley
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Publication 1734-UM011D-EN-P - May 2011

Configure the Adapter for Direct Connection in RSLogix 5000 Software 27

2. From the File menu, select New.

The New Controller dialog opens.

3. Enter an appropriate Name for the Controller, for example,

POINT_IO_Controller.

4. Select the correct Version, Chassis Type, and Slot number of the

Logix5555 controller, and the folder where you want to save the

RSLogix 5000 file (Create In). The Description is optional.

RSLogix 5000 software version 11 or later lets you choose to enable

redundancy. This example does not use redundancy. To use redundancy

in your system, check the Redundancy Enabled checkbox so that a

checkmark appears.

5. Click OK.

Configure the I/O

You now add the POINT I/O modules to the controller I/O configuration

performing these procedures.

Other manuals for Allen-Bradley Rockwell Automation 1734-AENT

Questions and Answers:

Need help?

Do you have a question about the Allen-Bradley Rockwell Automation 1734-AENT and is the answer not in the manual?

General