Allen-Bradley Rockwell Automation 1734-AENT User Manual

Publication 1734-UM011D-EN-P - May 2011
88 Configure the RSLinx Ethernet Communication Driver
Configure the AB_ETH/IP
Driver
To configure the AB_ETH/IP Ethernet communication driver, perform the
following steps.
1. Start RSLinx software.
2. From the Communications menu, select Configure Drivers.
3. Click the arrow to the right of the Available Driver Types box.
The Available Driver Types list appears.
4. Select EtherNet/IP Devices and click Add/New.
The Configure driver dialog opens.

Allen-Bradley Rockwell Automation 1734-AENT Specifications

General

Model	1734-AENT
Category	Network Hardware
Type	EtherNet/IP Adapter
Ethernet Ports	2
IP Addressing	Static or DHCP
Network Address	Configurable via software
Mounting	DIN rail
Number of Ports	2
Port Type	RJ45
Communication Protocol	EtherNet/IP
Manufacturer	Rockwell Automation
Power Supply	24V DC
Enclosure	Open-style