Allen-Bradley Rockwell Automation 1734-AENT User Manual

Publication 1734-UM011D-EN-P - May 2011
Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software 57
The New Module dialog opens.
4. From the New Module dialog, complete the following.
•Enter a value for Name.
• Enter a value for Slot.
•Click Change.
The Module Definition dialog opens.
5. From the Connection tab, select Rack Optimization.
6. Click OK.
The New Module dialog opens.
7. From the New Module dialog, click the Connection tab.

Allen-Bradley Rockwell Automation 1734-AENT Specifications

General

Model	1734-AENT
Category	Network Hardware
Type	EtherNet/IP Adapter
Ethernet Ports	2
IP Addressing	Static or DHCP
Network Address	Configurable via software
Mounting	DIN rail
Number of Ports	2
Port Type	RJ45
Communication Protocol	EtherNet/IP
Manufacturer	Rockwell Automation
Power Supply	24V DC
Enclosure	Open-style