Vend Price 1 AtS 1
This option allows the owner to set the vend price for all cycles,
but otherwise specifically for NORMAL 90 . This price should
be set before all other prices. This vend price will be shown in the
display when NORMAL 90 is selected.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad until Prog appears in the display. Press the START
(enter) keypad, and AtS 1 will appear in the display.
3. Press the START (enter) keypad. All cycle LEDs will be lit to
show all cycle prices are being programmed.
NOTE: To go back to the current programmable op-
tion without changing the value, press the DELI-
CATES 30 (<) keypad.
4. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to increase or decrease the value of the active digit
and the START (enter) keypad to enter the value of the digit
and advance to the next digit.
5. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Vend Price 2 AtS 2
This option allows the owner to set the vend price for NORMAL
60. This vend price will be shown in the display when NORMAL
60 is selected.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad until Prog appears in the display. Press the START
(enter) keypad, and AtS 1 will appear in the display.
3. The keypad LEDs will be lit to show which cycle price is be-
ing programmed.
4.
When AtS 2 appears in the display, press the START (enter)
keypad.
NOTE: To go back to the current programmable op-
tion without changing the value, press the DELI-
CATES 30 (<) keypad.
5. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to increase or decrease the value of the active digit
and the START (enter) keypad to enter the value of the digit
and advance to the next digit.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Vend Price 3 AtS 3
This option allows the owner to set the vend price for a NOR-
MAL 90 DELICATES COLD. This vend price will be shown in
the display when NORMAL 90 DELICATES COLDNORMAL
40 is selected.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad until Prog appears in the display. Press the START
(enter) keypad, and AtS 1 will appear in the display.
3. The keypad LEDs will be lit to show which cycle price is be-
ing programmed.
4.
When AtS 3 appears in the display, press the START (enter)
keypad.
NOTE: To go back to the current programmable op-
tion without changing the value, press the DELI-
CATES 30 (<) keypad.
5. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to increase or decrease the value of the active digit
and the START (enter) keypad to enter the value of the digit
and advance to the next digit.
6. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Vend Price 4 AtS 4
This option allows the owner to set the vend price for a PERM
PRESS 60. This vend price will be shown in the display when
PERM PRESS 60 is selected.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad until Prog appears in the display. Press the START
(enter) keypad, and AtS 1 will appear in the display.
3. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to scroll through the programmable options until AtS
4 appears in the display.
4. The keypad LEDs will be lit to show which cycle price is be-
ing programmed.
5.
When AtS 4 appears in the display, press the START (enter)
keypad.
NOTE: To go back to the current programmable op-
tion without changing the value, press the DELI-
CATES 30 (<) keypad.
6. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to increase or decrease the value of the active digit
and the START (enter) keypad to enter the value of the digit
and advance to the next digit.
7. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Vend Price 5 AtS 5
Programming Control
©
Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
44 Part No. 805405ENR5
To Next Page
Loading...
