Set Real-Time Clock rtC-
This option allows the owner to set the controls internal clock to
the correct time and date.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad until Prog appears in the display. Press the START
(enter) keypad, and AtS 1 will appear in the display.
3. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to scroll through the programmable options until
rtC- appears in the display.
4.
Press the START keypad and rtC 1 will appear in the dis-
play.
5. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to scroll through the programmable options. Refer to
Table 6 .
rtC 1
Programs Minutes
rtC 2
Programs Hours
rtC 3
Programs Day of Week
rtC 4
Programs Date of Month
rtC 5
Programs Month
rtC 6
Programs Year
Table 6
6. When the desired option appears in the display, press the
START (enter) keypad. The current value will appear in the
display.
7. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to increase or decrease the minutes, hours, day of
week, date of month, month or year to the correct time or
date.
NOTE: The hours will be displayed in military time.
For day of week, Sunday is considered day one (1),
Monday is day two (2) and so on. For year, the year
2000 is “ 0 ”, the year 2001 is “ 1 ” and so on.
8. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Set Daylight Savings Time dLS-
This option allows the owner to set the controls internal clock to
the daylight savings time and date.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad until Prog appears in the display. Press the START
(enter) keypad, and AtS 1 will appear in the display.
3. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to scroll through the programmable options until
dLS- appears in the display. Press the START keypad and
dLS 1 will appear in the display.
4. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to scroll through the programmable options. Refer to
Table 7 .
dLS 1
Daylight Savings (On/
Off)
dLS 2
Programs Start Month
dLS 3
Programs Start Day of
Week
dLS 4
Programs Start Week of
Month
dLS 5
Programs Start Hour
dLS 6
Programs End Month
dLS 7
Programs End Day of
Week
dLS 8
Programs End Week of
Month
dLS 9
Programs End Hour
Table 7
5. When the desired option appears in the display, press the
START (enter) keypad. The current value will appear in the
display.
6. Press the NORMAL 40 (∧) or the DELICATES COLD (∨)
keypad to increase or decrease the minutes, hours, day of
week, date of month, month or year to the correct time or
date.
NOTE: The hours will be displayed in military time.
For day of week, Sunday is considered day one (1),
Monday is day two (2) and so on. For year, the year
2000 is “ 0 ”, the year 2001 is “ 1 ” and so on. For
week of month, first week is "1", second week is
"2", third week is "3", and last week is "4".
7. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
Special Vend 1 Days Enable SP1 1
This option allows the owner to set the day or days of a special
vend.
Programming Control
©
Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
58 Part No. 805405ENR5
To Next Page
Loading...
