Allied Telesis x530L Series User Manual

x530L Series Installation Guide for Virtual Chassis Stacking
155
8
Enter the WRITE command to save your change.
awplus# write
Building configuration ...
[OK]
9 Power off the switches of the stack.
10 Cable ports 25 and 26.
11 Power on the switches.
12 Wait three minutes for the switches to initialize their management software and form
the stack.
13 Repeat “Verifying the Stack” on page 153.
Table 20. Adding Ports 25 and 26 to the Stack Trunk on the x530L-28GPX or x530L-28GTX Switch
Step Description and Command

Allied Telesis x530L Series Specifications

General

Brand	Allied Telesis
Model	x530L Series
Category	Switch
Language	English