x530L Series Installation Guide for Virtual Chassis Stacking
25
Mode wiring:
– Classes 0-4 (Type 1 or 2 up to 30W): Mode A (MDI-x)
– Classes 5-6 (Type 3 up to 45W/60W): Mode A (MDI-x) plus
Mode B (MDI-x, MDI)
– Classes 7-8 (Type 4 up to 75W/90W): Mode A (MDI-x) plus
Mode B (MDI-x, MDI)
IEEE802.3af/at/bt compliant
SFP+ Transceiver
Ports
Examples of SFP 1Gbps transceivers include:
SPSX and LR short and long distance transceivers using multi-
mode or single mode fiber optic cable.
SPEX transceivers with a maximum distance of two kilometers with
multi-mode fiber optic cable.
SP10BD bidirectional transceivers for single mode fiber optic cable
with a maximum distance of 10 kilometers.
Examples of SFP+ 10Gbps transceivers include:
SP10SR, LR, ER and ZR series of short or long distance
transceivers using multi-mode or single mode fiber optic cable.
SP10TW series of direct attach cables in lengths of 1 meter and 3
meters.
SP10T transceiver with RJ-45 connector for links up to 20 meters
at 10Gbps with Category 6a or better twisted pair cable, or 100
meters at 1Gbps.
SP10LRM Long Reach Multimode transceiver for OM1 multi-mode
fiber optic links up to 220 meters.
Industrial (-40 to 85° C) and extended (-40 to 105° C) temperature
transceivers are available.
SFP and SFP+ transceivers must be purchased separately. For a
current list of supported transceiver modules refer to the x530L
Series Data Sheet
The following restrictions on SFP+ transceivers apply:
100Mbps transceivers are not supported
Supports full-duplex mode only
To Next Page
Loading...
Need help?
General
