x530L Series Installation Guide for Virtual Chassis Stacking
23
Half-duplex mode at 10/100Mbps
Full-duplex mode at 10/100/1000Mbps
Auto-MDI/MDI-X at 10/100/1000Mbps
Port Link/Activity (L/A) and Duplex/Collision (D/C) LEDs
The twisted pair ports on the AT-x530L-28GPX (1 to 24) switch have these
features:
Ports 1 to 20 support 10Mbps, 100Mbps and 1 Gbps operation
Ports 21 to 24 support 100Mbps and 1/2.5/5Gbps operation
100 meters (328 feet) maximum operating distance per port
Auto-Negotiation for speed
Full-duplex mode only
MDI/MDI-X at 10Mbps/100Mbps
Power over Ethernet (PoE+) supported on all 24 ports
Port Link/Activity (L/A) and Power over Ethernet (PoE) LEDs
The twisted pair ports on the AT-x530L-52GPX (1 to 48) switch have these
features:
Ports 1 to 40 support 10/100Mbps and 1 Gbps operation
Ports 41 to 48 support 100Mbps and 1/2.5/5Gbps operation
100 meters (328 feet) maximum operating distance per port
Auto-Negotiation for speed
Full-duplex mode only
MDI/MDI-X at 10/100Mbps
Power over Ethernet (PoE+) supported on all 48 ports
Port Link/Activity (L/A) and Power over Ethernet (PoE) LEDs
Power Over
Ethernet
The basic features of PoE++ on the twisted pair ports on the x530L-
28GPX and x530L-52GPX switches are:
Supported on all ports
740W maximum power budget (370W per power supply):
– PoE (15.4 watts maximum) for 24 and 48 powered
devices on the x530L-28GPX and x530L-52GPX
switches, respectively
– PoE+ (30 watts maximum) for 24 powered devices
on the x530L-28GPX and x530L-52GPX switches
Supports powered device classes 0 to 4
To Next Page
Loading...
Need help?
General
