Amana ARGS7650 User Manual

15 RS2310002 Rev. 1
Installation Instructions for Slide-In Ranges
Pressure Regulator Location
Remove rear access cover to expose pressure regulator.
A
A—Approximately 12 inches
A
B
A—1
1
/8 inches
B—4
1
/3 inches
Pressure Regulator Conversion
Several varieties of gas pressure regulators may equip
gas cooking products. All gas pressure regulators
perform the same function. In most instances, universal
pressure regulators are used in gas cooking products.
Universal regulator can be modified to use either Natural
gas or liquefied petroleum (LP) gas supplies.
Universal pressure regulator, must be modified when
connecting gas cooking product to an LP gas supply.
How each type of universal pressure regulator is
converted to LP use is illustrated in the following
examples.
Example One
1. Remove pressure regulator cap with a
7
/8 inch wrench.
2. Remove plastic insert from cap. Insert fits tightly in
cap.
3. Reverse plastic insert. Push firmly into hole in cap.
4. Verify insert fits tightly in hole. Do not disturb spring
in regulator body.
5. Replace cap in regulator body.
Natural Gas
L.P. Gas
Plastic Insert
Cover
Spring Location
Example Two
1. Remove cap with screwdriver.
2. Remove insert.
3. Reverse insert and replace. “LPG10” is visible. Do not
disturb spring in regulator body.
4. Replace cap.
Natural Gas
L.P. Gas
Cap
Plug
Spring

Amana ARGS7650 Specifications

General

Brand	Amana
Model	ARGS7650
Category	Ranges
Language	English