Amana ARGS7650 - Level Range; Removal and Replacement of Range

RS2310002 Rev. 1 32
Installation Instructions for Freestanding Ranges
Level Range
Carefully level range using legs provided. Range must be
level to cook and bake uniformly.
CAUTION
!
To avoid damaging oven door, do not lift or move range
by oven door handle. Glass can break.
• Place a level on top oven rack or on top of range when
leveling.
• Leveling legs must be extended a minimum of
¼ inch to engage anti-tip bracket.
1. Extend leveling legs so when range is moved into
position range top clears counter top.
2. Slide range to where it will be installed.
• Position range so rear leveling legs do not engage
anti-tip bracket.
3. Turn leveling legs to level range.
• Turn legs clockwise to decrease range height or
counter clockwise to increase range height.
• Adjust rear leveling leg that engages anti-tip
bracket first. Leveling leg can not be adjusted while
in bracket. After adjusting leg that engages anti-tip
bracket, slide range until leg engages bracket, and
adjust other legs.
4. Replace storage drawer.
Removal and Replacement of Range
1. Disconnect power to range.
2. Slide range forward.
3. Unplug range cord and place range aside.
4. Remove anti-tip bracket.
5. Install anti-tip bracket into new location using
instructions provided with bracket or see “Anti-tip
Bracket Installation” section.
6. To reinstall range, follow installation instructions.