If the "OVERALL RESULTS" option is selected using the top left drop down button then
pressing on the drop down button underneath it will display a second drop down list.
This list provides test results that are based upon general test information and contains
"NONE", "TIME DURATION", "OVERALL PASS/FAIL RESULT", "RECORD NUMBER",
"DATE" and "TIME".
If the "TENSION STAGE" or "COMPRESSION STAGE" option is selected using the top left
drop down button then pressing on the drop down button underneath it will display a second
drop down list.
This list provides test results that are based on the force tester measurements and contains
"NONE", "PEAK LOAD", "BREAK LOAD", "AVERAGE LOAD", "LOAD AT LIMIT", “CUSTOM
LOAD AVERAGE”, "DISTANCE AT PEAK LOAD", "DISTANCE AT BREAK", "DISTANCE AT
PEAK" and "DISTANCE AT LIMIT".
72 CS User Manual
To Next Page
Loading...
Need help?
General
