User Manual California Instruments
CSW Series 91
8. Move the cursor to the START field and press the ENTER key. The display that you
selected will be shown. If you are in CONT trigger mode, the data will be updated about
once per second.
You can return to the HARMONICS/TRACE ANALYSIS screen by pressing the ENTER key. To
display the data in a different format, change to the selections you want and move the cursor to
the VIEW field. Pressing the ENTER key will re-display the data without triggering a new
acquisition. (This is true even if you were in CONT trigger mode.) To start a new acquisition, you
must go through the START field instead.
To Next Page
Loading...
