Ametek JOFRA RTC-156 B - Page 125

124 2014-07-30 127139 13
THERMAL SPECIFICATIONS RTC-156 A/B/C
60 mm / 2.36 inch axial homogeneity:
±0.035C/0.063°F @ -30°C/-22°F to 0°C/32°F
60 mm / 2.36 inch axial homogeneity:
±0.030°C/0.054°F @ 0°C/32°F to 50°C/122°F
60 mm / 2.36 inch axial homogeneity:
±0.035°C/0.063°F @ 50°C/122°F to 155°C/311°F
70 mm / 2.76 inch axial homogeneity:
±0.045C/0.081°F @ -30°C/-22°F to 0°C/32°F
70 mm / 2.76 inch axial homogeneity:
±0.040°C/0.072°F @ 0°C/32°F to 50°C/122°F
70 mm / 2.76 inch axial homogeneity:
±0.045°C/0.081°F @ 50°C/122°F to 155°C/311°F
80 mm / 3.15 inch axial homogeneity:
±0.060C/0.11°F @ -30°C/-22°F to 0°C/32°F
80 mm / 3.15 inch axial homogeneity:
±0.050°C/0.09°F @ 0°C/32°F to 50°C/122°F
80 mm / 3.15 inch axial homogeneity:
±0.060°C/0.11°F @ 50°C/122°F to 155°C/311°F
Difference between borings :
0.01°C/0.02°F
Influence from load :
0.10°C/0.18°F
Influence from load with Ext. Reference :
0.01°C/0.02°F
Long term drift (1 year) :
±0.04°C/±0.07°F
Temperature coefficient ±0.005°C/°C (0-20°C and 26-40°C) / ±0.009°F/°F
(32-68°F and 79-104°F)
Stability ±0.005°C/ ±0.009°F
Accuracy ±0.10°C/±0.18°F
Heating time incl. insert -30°C / -22.0°F to 23°C / 73.4°F : 4 min.
23°C / 73.4°F to 155°C / 311°F : 15 min.
-30°C / -22.0°F to 155°C / 311°F : 19 min.
Time to stability 10 min.
Cooling time incl. insert 155°C / 311°F to 100°C / 212°F: 4 min.
100°C / 212°F to 23°C / 73.4°F: 8 min.