User Manual – Rev AV AMETEK Programmable Power
MX Series 132
4.5 Standard Measurements
Standard measurements are always available through the MEAS key on the front panel. These
measurements are spread across two to four screens to enhance readability. Switching between
these screens can be done by successively pressing the MEAS button on the front panel. This
will cause the screen to cycle through all available measurement screens.
4.5.1 Standard Controller Measurements
For MX Series power sources with the –1 or –3 standard controllers, the following two
measurement screens are available:
To Next Page
Loading...
Need help?
General
