Ametek MX30-1 - Figure 9-28: IEC 61000-4-13 Test Flowchart Class 1 and 2

User Manual - Rev AV AMETEK Programmable Power
MX Series 226
9.5.4.3 RUNNING THE TEST
The test sequence used is a function of the EUT class. The end user needs to determine the
appropriate class of EUT. The test protocol is document in the IEC 61000-4-13 test standard. For
reference, the test flow charts are shown here. It is assumed that the end user has a copy of the
actual test standard however.
Start - Class 1/2
Determine appropriate test
configuration
Perform 8.2.1 Test
"Harmonic combination"
Flatcurve and Oversw ing
Any functional
anomalies?
No No
Class 2
required?
'Meister
curve' required?
Any functional
anomalies?
Any functional
anomalies?
Any functional
anomalies?
Test Completed
FA IL
Record Results
Test Completed
PA SS
Record Results
Yes
Yes
No
Perform 8.2.2 Test
"Frequency Sw eep"
Perform 8.2.4 Test
"Meister Curve"
Perform 8.2.3 Test
"Individual Harmonics/
Interharmonics"
Yes
Yes
No
Yes
Yes
No
No
Figure 9-28: IEC 61000-4-13 Test Flowchart Class 1 and 2