102 ASC110/ASC130/ASC150/ASC200/ASC250
2.7. Controlling and operation of the machine
((
((
(
1
3
4
4
3
2
2
3
4
• Unlock the safety pin of lifting before starting lowering.
• Push the sliding valve (3) on the other side of the
switchboard (1), secure it with safety pin (4) and pump
to lower the driver’s stand.
Screw the driver’s stand in after
lowering. If the driver’s stand is not
screwed in properly, the machine
may overturn and cause lethal
injuries.
Bonnet
• Push the sliding valve (3) on the switchboard (2) and
secure it in the position with safety pin (4).
• Pump to lift the bonnet.
• Unlock the safety pin of lifting before starting lowering.
• Push the sliding valve (3) on the other side of the
switchboard (2), secure it with safety pin (4) and pump
to lower the bonnet.
To Next Page
Loading...
