101ASC110/ASC130/ASC150/ASC200/ASC250
OPERATING INSTRUCTIONS
2
1
((
((
(
4
3
1
Manual lifting and lowering
• In case of el-hydraulic unit or flat battery, use the
manual hydro-generator to perform lifting and lowe-
ring.
• Open the cover (1) on the left side under the driver’s
stand. Take out the pump lever (2).
Driver’s stand
• Remove nuts of the driver’s stand.
• Push the sliding valve (3) on the switchboard (1) and
secure it in the position with safety pin (4).
• Insert the lever to the pump and lift the driver’s stand.
To Next Page
Loading...
