112 ASC110/ASC130/ASC150/ASC200/ASC250
2.9. Using the machine under special conditions
63
2
4
3
4
5
1
2
• Screw back multi-purpose valves on the hydro-
generator.
• Put the manual hydro-generator lever (63) to the hol-
der under the driver’s stand.
! WARNING!
During towing, leakage may cause pressure in
brakes decrease. When towing, check brakes for
heating due to insufficient brake release.
To put the machine into the original condition for ASC
200÷250
• Disconnect hoses (4).
• Reconnect hose (1) into the pressure filter and hydrau-
lic travel generator loop.
• Fix hose (4) in clamp (5).
To Next Page
Loading...
