111ASC110/ASC130/ASC150/ASC200/ASC250
OPERATING INSTRUCTIONS
2
3
1
3
4
1
2
To put the machine into the original condition for ASC
110÷150:
• Disconnect hose (1) from hose (3) in the quick coupling
(2).
• Connect hose (3) back to tube (4).
• Fix hose (1) in clip (2).
• Turn the ignition key to I position and check signal
lamp of brake (23) switched off.
! NOTE !
During towing, leakage may cause pressure in
brakes decrease. If brake signal lamp (23) lights up
during towing, pump more.
After towing, put the machine into its
original condition.
To Next Page
Loading...
