47ASC110/ASC130/ASC150/ASC200/ASC250
OPERATING INSTRUCTIONS
1. Risk of grasp Dangerous space with risk of grasp. (Symbols located on the left
and right side of the rear crossbar of the front frame)
2. Risk of burn Risk of burn. Do not touch the hot parts of the machine until
you’ve checked they are cold enough. (Symbol located on the
internal side of the side door)
3. Risk of injury Risk of injury and reeling. Do not touch the rotating parts while
the motor is still running. (Symbol located on the left side of the
cooler)
4. Coolant Risk of scald. Do not open the lid of the expansion tank until the
liquid gets cooled down bellow 50 °C (122 °F). (Symbol located
on the equalizing tank)
5. Adjust machine while switched off There is a risk of injury and hand capture in the rotating parts of
the machine. Do not make adjustment and maintenance while
the motor is still running. (Symbol located on the internal side of
the side door)
6. Read instruction manual Read the instruction manual before start up of the machine.
(Symbol located on the left side of the control board.)
To Next Page
Loading...
