Programming
111
NXD-700i & NXT-CA7 7” Modero Touch Panels
Panel Runtime Operation Commands (Cont.)
@TKP Present a telephone keypad.
Pops up the keypad icon and initializes the text string to that specified.
The Prompt Text is optional.
Syntax:
"'@TKP-<initial text>;<prompt text>'"
Variables:
initial text = 1 - 50 ASCII characters.
prompt text = 1 - 50 ASCII characters.
Example:
SEND COMMAND Panel,"'@TKP-999.222.1211;Enter Phone Number'"
Pops-up the Keypad and initializes the text string '999.222.1211' with prompt text 'Enter
Phone Number'.
TPAGEON Turn On page tracking.
This command turns On page tracking, whereby when the page or popups change, a
string is sent to the Master.
This string may be captured with a CREATE_BUFFER command for one panel and sent
directly to another panel.
Syntax:
"'TPAGEON'"
Example:
SEND COMMAND Panel,"'TPAGEON'"
Turns On page tracking.
TPAGEOFF Turn Off page tracking.
Syntax:
"'TPAGEOFF'"
Example:
SEND COMMAND Panel,"'TPAGEOFF'"
Turns Off page tracking.
@VKB Popup the virtual keyboard.
Syntax:
"'@VKB'"
Example:
SEND COMMAND Panel,"'@VKB'"
Pops-up the virtual keyboard.
WAKE Force the panel out of screen saver mode.
Syntax:
"'WAKE'"
Example:
SEND COMMAND Panel,"'WAKE'"
Forces the panel out of the screen saver mode.
To Next Page
Loading...
Need help?
General
