Setup Pages and Descriptions
59
NXD-700i & NXT-CA7 7” Modero Touch Panels
Refer to the Using G4 Web Control to Interact with a G4 Panel section on page 35 for more detailed
instructions on how to use the G4 Web Control page with the new web-based NetLinx Security application.
Other Settings
Holding down the Other Settings button provides a menu to select the Image Caching page, the Password
Settings page, the Sensor Settings page, or the SIP Settings page (FIG. 59). Select either option to access that
page.
G4 Web Control Settings Page (Cont.)
G4 Web Control Settings (Cont.):
Web Control Port: Allows entry of the VNC Web Server’s port value.
• Default value is 5900.
Maximum Number of
Connections:
This read-only field displays the maximum number of users that can be
simultaneously connected to the target panel via the Web.
• Default value is 1.
Current Connection Count: This read-only field displays the current number of users connected to the
target panel via the Web. This value cannot exceed the Maximum number field.
G4 Web Control Timeout: Sets the length of time (in minutes) the panel can remain idle (no cursor
movements) before the session is closed and the user is disconnected.
• Minimum value = 0 minutes (panel never times-out)
• Maximum value = 240 minutes (panel times-out after 240 minutes/4hours)
FIG. 58
Sample relationship between G4 Web Control and Mange WebControl Connections window
FIG. 59 Other Settings popup menu
To Next Page
Loading...
Need help?
General
