AMX NXD-700i - Phn-Linestate; Phn-Msgwaiting; Phn-Privacy; Phn-Redial

Programming
122
NXD-700i & NXT-CA7 7” Modero Touch Panels
SIP Commands (Cont.)
^PHN-LINESTATE Indicates the current state of each of the available connections used to manage
calls.
Syntax:
"'^PHN-LINESTATE, <connection id>, <state>, <connection id>,
<state>,...'"
Variables:
connection id = The identifying number of the connection.
state = IDLE, HOLD, or CONNECTED
extn = The local extension of this panel (see Example)
Example:
SEND_COMMAND Panel,"'^PHN-LINESTATE, 1, IDLE, 2, CONNECTED,
SIP, <extn>'"
^PHN-MSGWAITING Indicates the number of messages waiting the user’s voice mail box.
Syntax:
"'^PHN-MSGWAITING, <messages>, <new message count>, <old
message count>, <new urgent message count>, <old urgent
message count>'"
Variables:
messages = 0 or 1 (1 indicates new messages)
new message count = The number of new messages.
old message count = The number of old messages.
new urgent message count = The number of new messages marked urgent.
old urgent message count = The number of old messages marked urgent.
Example:
SEND_COMMAND Panel,"'^PHN-MSGWAITING, 1, 1, 2, 1, 0’"
^PHN-PRIVACY Indicates the state of the privacy feature.
Syntax:
"'^PHN-PRIVACY, <state>'"
Variable:
state = 0 (Disable) or 1 (Enable)
new message count = The number of new messages.
old message count = The number of old messages.
new urgent message count = The number of new messages marked urgent.
old urgent message count = The number of old messages marked urgent.
Example:
SEND_COMMAND Panel,"'^PHN-PRIVACY, 0’"
^PHN-REDIAL Indicates the panel is redialing the number.
Syntax:
"'^PHN-REDIAL, <number>'"
Variable:
number = The phone number to dial.
Example:
SEND_COMMAND Panel,"'^PHN-REDIAL, 2125551000’"
^PHN-TRANSFERRED Indicates a call has been transferred.
Syntax:
"'^PHN-TRANSFERRED'"
Example:
SEND_COMMAND Panel,"'^PHN-TRANSFERRED’"