3.3 Instrument and Labeling Symbols
This section describes the symbols that appear on the exterior of the Urilyzer 100
analyzer, the power supply provided with the instrument, the packaging in which
the instrument was delivered and the supplies of reagent strips which you will
use with the instrument.
Double insulated product or
transformer may also identi-
fy class 2 equipment (power
supply only)
Indoor use only
Identifies that the instru-
ment is listed by Underwrit-
ers Laboratories as meeting
U.S. and Canadian require-
ments for safety
The CE mark identifies that
the product complies with
the applicable directives of
the European Union
This product has been tested
to the requirements of CAN/
CSA-C22.2 No. 61010-1,
second edition, including
Amendment 1, or a later ver-
sion of the same standard
incorporating the same level
of testing requirements.
This system contains cer-
tain toxic or hazardous sub-
stances or elements. The
environmental protection
use period for this system
is 10 years. The system can
be used safely during its en-
vironmental protection use
period. The system should
be recycled immediately af-
ter its environmental protec-
tion use period has expired.
Indicates that this equip-
ment is classified as Waste
Electrical and Electronic
Equipment under the Eu-
ropean WEEE Directive. It
must be recycled or dis-
posed of in accordance
with applicable local re-
quirements.
In vitro diagnostic medical
device
Caution, consult accompa-
nying documents
Manufacturer Catalog number
Consult instructions for use Serial number
To Next Page
