Analyticon Urilyzer 100 Pro - Start-Up Wizard Configuration

27
Start-Up Wizard
6. Start-Up Wizard
The first time your Urilyzer 100 analyzer is turned on, it will take you through a
quick set up procedure. This procedure will allow you to select the basic func-
tions of the analyzer so you can use the analyzer with your choice of settings.
The Start-Up Wizard will allow you to select the following settings:
• Language
• Dateandtime(

11.2 Date, time)
• Systemsecurity(

11.14.2 Modifying security settings)
 – Change‘supervisor’operatorpassword
(optional: depends on selected security level)
• Testingworkow(

7.2.2 Customization of testing)
• Printout(

11.3 Printout)
• QC(

9.1 QC Options)
– Add operators (

11.14.5 User management)
(optional: depends on selected security level)
 If you wish to skip the wizard and perform it another time, press Skip on the
second screen.
 If you require further instructions regarding how to change the settings see

11 Instrument Settings.
At the end of wizard press Start to finish the wizard.
Youcanreviewallsettingsonthe‘Options»View’ settings screen. All settings, in-
cludingconnectivity(‘Output’)canbechangedat‘Options»Settings’ screens.