Plug the USB flash drive into one of the USB A connectors on the back of the
device. Wait until the
disk icon appears in the status line. The icon shows that
the USB flash drive was recognized by the system.
Go to Settings (2)»Update screen. The analyzer recognizes that a software
update package is available and verifies the integrity of the package. If the pack-
age is verified, the Update button will be available.
If no update source was found by the system, the button name is changed to
Refresh. Push the Refresh button to force the system to check again all up-
date peripherals.
To start the process, press the Update button. The update will be performed
automatically.
After the update is finished successfully, press the Restart button and remove
the USB flash drive.
Please note that the update process will not overwrite or delete the existing
database or your settings.
4.3.1 Preparation of the USB flash drive
If you received the software update in electronically distributed format, please
follow these instructions for preparation of the USB flash drive.
To copy the update package on the USB drive you will need a PC and some
basic knowledge of the operating system.
1) Create an ’update’ directory in the root of the USB drive.
2) Unzip and copy the content of the whole package into the ’update’ directory.
The file names will be similar to these: udr2base_x.x.x.tar.gz, udr2base_x.x.x.tar.
gz.chk, iUD2vX, iUD2vX.chk (x, X are replaced with numbers). In case of Uri-
lyzer 100 Pro ‚base‘ is replaced with ‚pro‘.
4.3.2 Available sources for software updates
The software update is possible from various sources:
• USBashdrive,
• microSDcard,
• codechip.
If you receive an updated description with the software update, please
follow those instructions.
The sockets for external microSD card and code chip are located under the
printer cover and are on the right-hand side of the printer when you face the front
of the instrument. The code chip socket is above the microSD card socket.
Special instructions for updating the software on your instrument from mi-
croSD card or code chip will be supplied with them.
To Next Page
