Analyticon Urilyzer 100 Pro - Page 53

52
53
Instrument Settings
11.4.1 Bidirectional protocol (LIS2-A2)
The two-way digital transmission protocol of Urilyzer
100 analyzer regarding remote requests and results
between Urilyzer 100 and information systems is
based on the NCCLS LIS2 A2*) approved standard.
It enables Urilyzer 100 and any standard LIS system,
to establish a logical link for communicating text
to send results and requests in a standardized and
interpretable form.
You can set a custom header and at the Output type
input field you can define
1. the output type: serial, USB B, TCP/IP (Ethernet)
2. the speed of serial communication (only for serial
port).
If TCP/IP (Ethernet) is selected, please set the serv-
er’sIPaddressandportseparatedwith‘:’symbol.
11.4.2 Comma-separated value output
Separator: tabulator, semicolon, comma
Output » LIS2
*) NCCLS LIS2-A2: Specification for Transferring Information Between Clinical
Laboratory Instruments and Information Systems; Approved Standard–Second
Edition (Volume 24 Number 33)