12.3. Output Data
Select an output data (Si F-01) from the following:
1: Displayed weight value (default)
2: Gross value
3: Net value
4: Tare value
5: Gross value + Net value + Tare value
6: Total weight
7: Number of accumulations
8: Total weight and number of accumulations
12.4. Communication Type
Select a communication Type (Si F-02) from the following:
1: Interval output at the display update rate (FncF-03) (default)
2: In synchronization with automatic print
3: In synchronization with manual print
4: In synchronization with automatic/manual accumulation
To Next Page
Loading...
