Anderson DA2 - Transmitter Performance (Electrical, Analog Outputs); Mechanical

PAGE 8
2.2 T2.2 T
2.2 T2.2 T
2.2 T
ransmitter Pransmitter P
ransmitter Pransmitter P
ransmitter P
erformance (Electrical, Analog Outputs)erformance (Electrical, Analog Outputs)
erformance (Electrical, Analog Outputs)erformance (Electrical, Analog Outputs)
erformance (Electrical, Analog Outputs)
Accuracy* ± 0.1% of span
Sensitivity* ± 0.05% of span
Repeatability* ± 0.05% of span
Temperature Drift* Zero and Span: ± 0.02% of span per °C
Response Time 1-60 seconds to 90% of value upon step change (with
sensor filter setting of zero)
*These typical performance specifications are:
1. Based on 25°C with conductivity of 500 µS/cm and higher. Consult factory for applications in
which conductivities are less than 500 µS/cm.
2. Derated above 100°C to the maximum displayed temperature of 200°C. Consult factory for details.
2.3 Mechanical2.3 Mechanical
2.3 Mechanical2.3 Mechanical
2.3 Mechanical
Enclosure Polycarbonate; NEMA 4X general purpose; choice of
included mounting hardware
Mounting Configurations Panel, wall, pipe or integral sensor mounting
Dimensions With Back Cover:
3.75 in. W x 3.75 in. H x 2.32 in. D
(95 mm W x 95 mm H x 60 mm D)
Without Back Cover for Panel Mount:
3.75 in. W x 3.75 in. H x 0.75 in. D
(95 mm W x 95 mm H x 19 mm D)
Net Weight 10 oz. (280 g) approximately