3-15 Measurements Menu Interference Analyzer (Option 25)
3-56 PN: 10580-00349 Rev. H Spectrum Analyzer MG
AM/FM Demod 2/2 Menu
Key Sequence: Measurements > Spectrum > AM/FM Demod > More
Squelch Power: Sets the squelch power value. Use this setting to limit
noise when there is no signal to demodulate. The squelch value is the limit
below which no signal is demodulated.
Beat Freq Osc: Sets the beat frequency of the oscillator to exactly set the
demodulation frequency of USB and LSB signals. This key is active only
when USB or LSB is selected as the Demod Type. This can also be used
when demodulating CW (Morse code) signals.
Back: Returns to the “AM/FM Demod 1/2 Menu” on page 3-54.
Figure 3-50. IA AM/FM Demod 2/2 Menu
AM/FM Demod 2/2
Back
Squelch Power
## dBm
Beat Freq Osc
0 Hz
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
