Anritsu Spectrum Master MS2720T User Manual

Chapter 2 —Fixed WiMAX Signal Analyzer 2-13 Trace Menu
WiMAX MG PN: 10580-00236 Rev. D 2-25
2-13 Trace Menu
Key Sequence: Shift > Trace (5) key
2-14 Limit Menu
This menu is not available in Fixed WiMAX measurement mode.
2-15 Other Menus
Preset, File, Mode and System are described in the instrument User Guide.
Max Hold: Press this submenu key to toggle Max Hold On or Off. It applies
to Spectrum view and EVM vs Sub Carrier view. This function allows the
spectrum trace to hold its peak value from trace to trace. This helps in
capturing a representative spectrum of a burst RF signal, such as WiMAX.
All Max Hold operations show two traces. One trace is a max hold value, and
the other is a live trace with the current measurement results.
Figure 2-22. Fixed WiMAX Sweep Menu
Trace
Max Hold
Off On
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

Anritsu Spectrum Master MS2720T Specifications

General

Brand	Anritsu
Model	Spectrum Master MS2720T
Category	Measuring Instruments
Language	English